We request that the interest
for the sponsorship or acquisition of a booth be communicated
to the Professors Marcos A. Pimenta and Ado Jorio
(nt07@fisica.ufmg.br).
The basic setup of the booths is constituted of:
FLOOR -
The carpet of the booth will be in the standard of nylon
in gray.
DIVISORY WALLS
- Constituted by white laminated TS formic panels
on both sides. The panels will be framed on natural anodized
aluminum frames of octogonal NKN system.
BEAMS -
For the sustentation of the divisories, spot lights installation
and the fixation of the companies identification sign will
be assembled on the upper part of the booth beams with frontal
aluminum frames being mounted with double frames. The beam
assembly height will be 2,20m.
COMPANY'S IDENTIFICATION
SIGN - For each basic booth will be installed an
semi-curve identification sign measuring 2,18m (horizontal
direction) by 30cm of height, made with white laminated
TS formic panel. The exhibitor's name will be reproduced
with adhesive letters in helvetic, black, capital letter
and 10cm of height. Maximum of foreseen letters: 20 characters.
ILLUMINATION -
It will be made throught fluorescent luminary HO/70 watts,
installed at the beam (day light lamp 2,20m).
SOCKET -
For each booth will be installed 1(one) basic 110volts socket
with capacity for 250watts. Without grounded-phase.
ENERGY DISTRIBUTION
- According to the developed project, energy distribution
services will be made in all the booths assembled with cables
of 10m/m and wire 2 ½m/m in 3 phases and neuter.
FOLDER SHELF -
Each booth will be supplied by 2(two) folder shelves that
admit little weight. The shelves are made of TS formic and
shaped with aluminum frames, 30cm depth by 95cm width, being
mounted on regulated supports in height, installed on the
divisories frames.
FURNITURE
- For each booth will be supplied 3(three) black
upholstered chairs and 1(one) rounded table with a fumê
glass top.
